1038521826884939
top of page

Abrasive Cutting Machines Classification

1.jpg

Abrasive Cutting Machine

ECOCUT-100

2.jpg

Abrasive Cutting Machine

Metal CV-5S

3.jpg

Abrasive Cutting Machine

Metal CV-5A 

Manual Industrial Shop Floor Abrasive Cutting Machine  Model : ECOCUT - 100

 

Features : 

​

  • Beltless Direct Drive design for vibration free Polished Cutting - Internal Chamber 800x900x1000 mm.

  • Banvario BM Asynchronous Motor.

  • RPM = 2880

  • 3 Phase 4.8 K Watts or 5 HP.

  • Cut off Wheel Dia = 350 mm

  • All Electrical of Siemens/ L & T or Equivalent - Cooling By 4 High Speed Jets - Coolant Tank Capacity 200 Liter.

  • 75 mm Drain.

  • 1 k w Coolant Recirculation Pump

  • Cutting Capacity - Up to X100, Y150, Z150 mm and very spacious Chamber for easy Operation And Maintenance.

  • All Three Axis movement Standard X,Y, & Z

  • Standard Coolant Spillage Tray Inbuilt

  • Washing Gun to clean the Entire cutting area after cutting operation

 

For more information visit our store!

 

 

Semi-Automatic Industrial Shop Floor Abrasive Cutting Machine Model: METAL CV-5S

 

Features: 

​

  • Beltless Direct Drive design for vibration free Polished Cutting - Internal Chamber 800x900x1000 mm.

  • Banvario BM Asynchronous Motor.

  • RPM = 2880

  • 3 Phase 4.8 K Watts or 5 HP Cutting motor.

  • Cut off Wheel Dia = 350 mm

  • Cutting Capicity-Up to X100, Y100, Z150 MM and spacious Chamber

  • All Electrical of Siemens/L & t or Equivalent

  • 75 mm Drain

  • Water Proof illumination Standard Panasonic-IP 66

  • Phase Monitoring system is Standard Features on Touch Screen

  • X, Y, Z Axis motorized &Operation using Touch Screen

  • Multi Jet high pressure cooling system using programmed 80 Lpm coolant pump.

  • Magnetic Chip Separator as standard factory fitting - Fully Manual mode.

  • Standard Coolant Spillage Tray Inbuilt - Coolant Tank Capacity 200 Litter.

  • 1 kw Coolant Recirculation Pump

  • Door Safety Interlock – Additional Safety Where the Door cannot be opened unless the Cutting Process is Stopped.

  • Washing Gun to clean the Entire cutting area after cutting operation

Fume Exhaust – This helps to recirculate the fume caused while cutting into coolant. Give clear vision on cutting process and also avoid human health hazards

​

Navigate our website to see the list of Products! 

CNC based Fully Automatic Industrial Shop Floor Abrasive Cutting  Machine

Model : Metal CV-5A 

 

Features :

  

  • Beltless Direct Drive design for vibration free Polished Cutting - Internal Chamber 800x900x1000 mm.

  • Banvario BM Asynchronous Motor.

  • RPM = 2880

  • 3 Phase 4.8 K Watts or 5 HP Cutting motor.

  • Cut off Wheel Dia = 350 mm

  • Cutting Capicity-Up to X100, Y100, Z150 MM and spacious Chamber

  • All Electrical of Siemens/L & t or Equivalent

  • 75 mm Drain

  • Water Proof illumination Standard Panasonic-IP 66

  • Phase Monitoring system is Standard Features on Touch Screen

  • X, Y, Z Axis motorized &Operation using Touch Screen

  • Joy –stick and Touch screen based operation , Customized for fully Automatic

 

Cutting of  Induction & Through Hardened components. - Coolant Tank Capacity 200 Liter.

​

  • 1 kw Coolant Recirculation Pump

  • Standard Coolant Spillage Tray Inbuilt

  • Multi Jet high pressure cooling system using programmed 80 Lpm coolant pump.

  • Multi jet High pressure machine wash system for 1 touch cleaning of entire Cutting Chamber

  • Door Safety Interlock – Additional Safety Where the Door cannot be opened unless the Cutting Process is Stopped.

  • Fume Exhaust – This helps to recirculate the fume caused while cutting into coolant. Give clear vision on cutting process and also avoid human health hazards -Magnetic Chip Separator as standard factory fitting.

  • All three working modes simultaneously available:

    1. Fully Manual mode using Hand Levers

    2. Semi-Automatic using Hand held Keypad Cntrol

    3. Fully programmed mode for totally hands free operation and preset parameters

 

Five cutting modes included as standard.

​

  1. Chip Cutting

  2. Pulse Cutting.

  3. Transverse Cutting.

  4. Oscillatory Cutting.

  5. Orbital Cutting.

​

Contact Us for More Information!

Delivery Instructions/Guidelines

 

18% GST is payable on above charges. 

Payment      : 100% Advance.

Delivery       : Pre Inspection after 4 weeks and delivery will within Six Weeks from date of receipt of advance payment 

Installation  : By our team at your site.

Freight         : Extra at actual

Handling      : will be in your scope

Warranty      : 1 Years against any manufacturing defects.

​

For Hardness Tester related information Visit Us!

bottom of page