AUTOMATIC/ABRASIVE CUTTING MACHINE
SERVOCUT-8A

Automatic Cutting Machine - FEATURES

1) Industrial Shop Floor Automatic Abrasive Cutting Machine Servocut-8A, 

     Features / Catalogues Attached with PLC and Drives

​

• 7.5 HP Triple Belt Drive, 

• Internal Chamber 1000x1000X1000 mm

• Three Axis Movements.: 550X400X300 mm.

• Keypad and Touch screen based operation, customised for your components. 

• Cutting Wheel Oscillations movements in addition to Conventional cutting using High RPM cold abrasion. 

• Multi Jet high pressure cooling system using programmed 1 HP pump.

• Multijet High Pressure machine wash system for 1 touch cleaning of entire Cutting Chamber

• Double Limit switches provision in mechanically and extra inputs in PLC

​​

All three working modes simultaneously available: 
   1. Fully Manual mode using Hand Levers
   2. Semi-Automatic using Hand held Keypad Control
   3. Fully Programmed mode for totally hands free operation and

       preset parameters. 

​

2) Motorized X Movement for Cross Feed using Mitsubishi/ Delta VFD and

    Gear Box. 

3) Double Layer tray filtration System with double sieves - will accommodate

    and tear off existing filter paper 

4) Programmable and Variable RPM for cutting Wheel from HMI using

    Mitsubishi/ Delta VFD 

5) Automatic Servo System for Z axis for programmed depth of cuts. 

6) Extra charges for all SS 304  16 Gauge fabrication for entire  inner and

    outer cutting chamber with SS Ribs support  and SS Screws